|
|
|
|
For LPG appliances |
|
|
- Always use BIS approved appliances
- Obtain BIS approved rubber tubes and LPG regulators from authorized distributors only
|
|
|
While receiving cylinders |
|
|
- Check the cylinder has been delivered with the company seal and safety cap intact
- If you are not sure about usage, please ask the delivery person for a demonstration
- Cylinders must be installed at ground level on a level surface
|
|
|
Before Usage |
|
|
- Check to see that rubber ‘O’ ring inside the cylinder valve is present
- Check for any visible signs of leakage – through visual inspection, soap solution or smell
- Never use lighted match-sticks for checking leaks
- Always keep the cylinder in upright position at ground level at a well ventilated place
- Do not install the LPG cylinder in the cabinet
- The LPG stove must always be installed on kitchen slab at height above the cylinder
- The cylinder must be kept away from other sources of heat
|
|
|
After Usage |
|
|
- Close the regulator knob to ‘OFF’ position when cylinder is not in use
- The empty cylinders must be stored in a cool and well ventilated place with safety cap put ON
|
|
|
Servicing |
|
|
- Replace your rubber tube at least every two years
- Get your gas appliances periodically serviced
|
|
|
In case of Leak |
|
|
- Do not Panic
- Do not Switch On or Switch Off any electrical appliances in the room
- Isolate main electrical supply from the outside only
- Extinguish all flames, lamps, incense sticks, etc
- Close the appliance and LPG regulator
- Put On the Safety Cap on the cylinder
- Open all Doors & Windows for ventilation
- Never use an electric fan for ventilation
- Call your Super Gas dealer / Company for help
|
|
|
Top |
|
|
|
|
|
